[獲取源碼]

https://gitee.com/openharmony/docs/blob/master/zh-cn/device-dev/quick-start/quickstart-pkg-sourcecode.md

[安裝hb工具]

https://gitee.com/openharmony/docs/blob/master/zh-cn/device-dev/quick-start/quickstart-pkg-install-tool.md

注意：默認下載的是master分支版本，如果想下載其他分支版本請將-b master改為需要下載的分支。

比如下載OpenHarmony-4.0-Release:

repo init -u git@gitee.com:openharmony/manifest.git -b OpenHarmony-4.0-Release --no-repo-verify

hb 安裝報錯：

WARNING: The scripts alldefconfig, allmodconfig, allnoconfig, allyesconfig, defconfig, genconfig, guiconfig, listnewconfig, menuconfig, oldconfig, olddefconfig, savedefconfig and setconfig are installed in '/home/xxx/.local/bin' which is not on PATH.
  Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
  WARNING: The script hb is installed in '/home/xxx/.local/bin' which is not on PATH.
  Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.```

解決辦法：

1. 將以下命令拷貝到.bashrc文件的最后一行，保存并退出。

export PATH=~/.local/bin:$PATH

2. 執行如下命令更新環境變量

source ~/.bashrc
python3 -m pip uninstall ohos-build   
python3 -m pip install --user build/hb

工程編譯

選擇目標工程：

執行hb set選擇hpmicro下的hpm6750evk2:

也可以直接通過命令指定

hb set -p hpm6750evk2

編譯工程

執行`hb build -f` 進行工程編譯，編譯成功后顯示如下內容：

打開xts功能

執行hb build -f --gn-args="build_xts=true"命令進行xts編譯。

鏡像燒錄

下載安裝燒錄工具(windows)

點擊[先楫系列資料] 百度網盤下載sdk/HPMicro_Manufacturing_Tool_vx.x.x.zip

網盤鏈接：https://pan.baidu.com/s/1RaYHOD7xk7fnotmgLpoAlA?pwd=xk2n

下載后解壓HPMicro_Manufacturing_Tool_vx.x.x.zip文件到任意目錄。

找到 hpm_manufacturing_gui.exe，雙擊執行程序：

下載程序到開發板：

1. 將開發板的USB2UART0接口連接至PC，正確連接后，PC可識別到一路usb串口，hpm6750evk2板載了ch340 usb轉串口芯片。

2. 將BOOT撥碼開關設置為:

boot0: 0 
boot1: 1

撥碼開關設置好后，點擊開發板的`RESTN`按鈕，進行復位，復位后進入到isp模式。

3. 配置hpm_manufacturing_gui的 類型為：UART 并選擇選擇步驟1中對用的串口，點擊連接：

連接成功：

4. 拷貝編譯好的固件程序out/hpm6750evk2/hpm6750evk2/OHOS_Image.bin到windows。

5. 選擇固件程序，點擊燒寫進行下載:

6. 設置撥碼開關為正常模式

boot0: 0 
boot1: 0

7. 打開一個串口終端MobaXterm，重啟開發板，串口打印啟動信息

8. hpm_manufacturing_gui更多用法，請參考：HPMicro_Manufacturing_Tool_vx.x.xdocuser_manual.html

openocd 進行調試鏡像

1. 下載openocd

git clone git@gitee.com:hpmicro/riscv-openocd.git -b riscv-hpmicro

2. 安裝依賴工具

sudo apt install libtool libusb-1.0-0-dev libhidapi-dev libftdi-dev

3. 安裝

進入源碼目錄，并執行下面的命令

./bootstrap
./configure
make -j16
sudo make install
sudo cp contrib/60-openocd.rules /etc/udev/rules.d/

4. 連接燒寫和目標板

5. 啟動openocd

進入到ohos源碼device/soc/hpmicro/sdk/hpm_sdk/boards/openocd,執行如下命令：

$ openocd -s . -f probes/cmsis_dap.cfg -f soc/hpm6750-single-core.cfg -f boards/hpm6750evk2.cfg
Open On-Chip Debugger 0.11.0+dev (2024-01-08-14:39)
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst

Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : CMSIS-DAP: SWD supported
Info : CMSIS-DAP: JTAG supported
Info : CMSIS-DAP: Atomic commands supported
Info : CMSIS-DAP: Test domain timer supported
Info : CMSIS-DAP: FW Version = 2.0.0
Info : CMSIS-DAP: Interface Initialised (JTAG)
Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 1 nTRST = 0 nRESET = 0
Info : CMSIS-DAP: Interface ready
Info : clock speed 8000 kHz
Info : cmsis-dap JTAG TLR_RESET
Info : cmsis-dap JTAG TLR_RESET
Info : JTAG tap: hpm6750.cpu tap/device found: 0x1000563d (mfg: 0x31e (Andes Technology Corporation), part: 0x0005, ver: 0x1)
Info : [hpm6750.cpu0] datacount=4 progbufsize=8
Info : Examined RISC-V core; found 2 harts
Info :  hart 0: XLEN=32, misa=0x4094112d
[hpm6750.cpu0] Target successfully examined.
Info : starting gdb server for hpm6750.cpu0 on 3333
Info : Listening on port 3333 for gdb connections

6. 打開另一個終端,并進入ohos源碼目錄，啟動gdb

$ riscv32-unknown-elf-gdb
GNU gdb (GDB) 8.1.50.20180718-git
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "--host=x86_64-pc-linux-gnu --target=riscv32-unknown-elf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
.
Find the GDB manual and other documentation resources online at:
    .

For help, type "help".
Type "apropos word" to search for commands related to "word".
(gdb)

7. 選擇需要調試的鏡像，并進行加載調試

(gdb) file out/hpm6750evk2/hpm6750evk2/OHOS_Image
Reading symbols from out/hpm6750evk2/hpm6750evk2/OHOS_Image...done.
(gdb) target extended-remote :3333
Remote debugging using :3333
warning: Target-supplied registers are not supported by the current architecture
_start () at ../../../device/soc/hpmicro/hpm6700/liteos_m/los_start.S:26
26    la gp, __global_pointer$
(gdb) load
Loading section .nor_cfg_option, size 0x10 lma 0x80000400
Loading section .boot_header, size 0x90 lma 0x80001000
Loading section .start, size 0x2e lma 0x80003000
Loading section .vectors, size 0x3c0 lma 0x8000302e
Loading section .text, size 0x5876e lma 0x800033ee
Loading section .data, size 0x1158 lma 0x8005bb5c
Start address 0x80003000, load size 367956
Transfer rate: 6 KB/sec, 13141 bytes/write.
(gdb) c

審核編輯：劉清