ST公司的STSPIN840是緊湊的有刷DC馬達驅動器,能同時驅動兩個雙向有刷DC馬達,在4 x 4 mm QFN封裝上集成了兩個控制邏輯和全保護低RDSon兩個全橋功率級,工作電壓從7V到45V,最大輸出電流1.5Arms,全保護包括非耗散過流保護,短路保護,欠壓鎖住和熱關斷。主要用在工業自動化和服務機器人,醫療和保健,ATM,舞臺照明,熱打印機,紡織和縫紉機,銷售機以辦公和家庭自動化。本文介紹了STSPIN840主要特性,框圖,應用框圖和電路,以及馬達驅動擴展板X(qián)-NUCLEO-IHM15A主要特性,電路圖和材料清單。
The STSPIN840 is a compact brushed DC motordriver able to drive two bi-directional brushed DCmotors simultaneously. It integrates, in a verysmall 4 x 4 mm QFN package, both the controllogic and a fully protected low RDSon dual fullbridgepower stage.
Thanks to a dedicated PARALLEL input pin theparallel mode function can be enabled,transforming the device in an equivalent andmore powerful single full-bridge able to deliver upto 3Arms current at an equivalent HS + LS RDSonof 500 mohm.
The STSPIN840 embeds two independent PWMcurrent controllers (one for each full bridge) basedon user settable values of reference voltage andOFF time.The devices can be forced in a low consumptionstate reducing the total current consumption downto less than 45uA.
As with all other devices from the STSPIN family,the STSPIN840 integrates a complete set ofprotections for the power stages (non-dissipativeovercurrent, thermal shutdown, short-circuit andundervoltage lockout) making it a bulletproofsolution for the new wave of demanding industrialapplications.
STSPIN840主要特性:
? Operating voltage from 7 to 45 V
? Maximum output current 1.5 Arms
? RDSon HS + LS = 1 ohmtyp.
? Current control with adjustable OFF time
? Current sensing based on external shuntresistors
? Full protections set
– Non-dissipative overcurrent protection
– Short-circuit protection
– Undervoltage lockout
– Thermal shutdown
? Parallel operation mode achieving single fullbridgeconfiguration with output IRMS = 3 Armsand RDSon HS + LS = 500 mohmtyp.
? Low standby current consumption
STSPIN840應用:
? Industrial automation and service robots
? Medical and health care
? ATM and money handling machines
? Stage lighting
? Thermal printers
? Textile and sewing machines
? Vending machines
? Office and home automation
圖1.STSPIN840框圖(通用)
圖2.STSPIN840 PARALLEL模式應用電路
圖3.STSPIN840典型應用電路
基于STSPIN840的雙刷DC馬達驅動擴展板X(qián)-NUCLEO-IHM15A
Dual brush DC motor driver expansion board based on STSPIN840 for stm32 Nucleo The X-NUCLEO-IHM15A1 dual brush DC motor driver expansion board is based on the STSPIN840 for STM32 Nucleo.
It provides an affordable and easy-to-use solution for the implementation of compact motor driving applications such as thermal printers, robotics and toys.
Thanks to the parallel operation, it can be easily converted to a single brush DC driver with double current capability.
The current limiters and complete set of protection features make it suitable for rugged applications.
The X-NUCLEO-IHM15A1 is compatible with the Arduino UNO R3 connector and most STM32 Nucleo boards.
馬達驅動擴展板X(qián)-NUCLEO-IHM15A主要特性:
Voltage range from 7 to 45 V
Output current up to 1.5 Arms for each motor
Two independent current limiters with adjustable OFF time
Full protection set including: overcurrent, short-circuit, under voltage lock out and thermal shutdown
Parallel operation
Compatible with Arduino UNO R3 connector
Compatible with STM32 Nucleo boards
圖4.馬達驅動擴展板X(qián)-NUCLEO-IHM15A外形圖
圖5.馬達驅動擴展板X(qián)-NUCLEO-IHM15A開關和連接器位置圖
圖6.馬達驅動擴展板X(qián)-NUCLEO-IHM15A電路圖
馬達驅動擴展板X(qián)-NUCLEO-IHM15A材料清單:
詳情請見:
https://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-move-actuate-hw/x-nucleo-ihm15a1.html
和
https://www.st.com/content/ccc/resource/technical/document/user_manual/group1/25/97
/d7/aa/39/2e/42/53/DM00492395/files/DM00492395.pdf/jcr:content/translations/en.DM00492395.pdf
以及
https://www.st.com/content/ccc/resource/technical/layouts_and_diagrams/schematic_pack
/group0/09/77/78/f0/e3/df/4b/88/x-nucleo-ihm15a1_schematic/files/x-nucleo-ihm15a1_schematic.pdf/jcr:content/translations/en.x-nucleo-ihm15a1_schematic.pdf
和https://www.st.com/content/ccc/resource/technical/document/bill_of_materials/group0
/67/7a/38/e4/32/b4/42/ff/x-nucleo-ihm15a1_bom/files/x-nucleo-ihm15a1_bom.pdf/jcr:content/translations/en.x-nucleo-ihm15a1_bom.pdf
en.x-nucleo-ihm15a1_schematic.pdf
en.DM00492395.pdf
stspin840(1).pdf
en.x-nucleo-ihm15a1_bom.pdf
-
驅動器
+關注
關注
54文章
8688瀏覽量
149842 -
馬達驅動器
+關注
關注
0文章
30瀏覽量
16138
發布評論請先 登錄
TI推出業界最小型1.8A有刷DC電機驅動器DRV8x

德州儀器針對電池供電應用推出1.8A有刷DC馬達驅動器

基于STM32CUBEMX驅動低壓步進器電機驅動器STSPIN220(2)----驅動STSPIN220

意法半導體發布面向高電壓應用的新STSPIN32 BLDC電機驅動器
普誠科技BLDC馬達控制\馬達驅動\MCU介紹\直流有刷及步進馬達驅動等相關資料
意法半導體發布新款STSPIN電機驅動器,可簡化中低功率電機驅動設計,提高電機控制的靈活性
基于A4936設計的三相無刷DC馬達驅動技術

TI推出最新馬達驅動器評估平臺 可支援有刷直流與步進馬達
DC馬達電機控制設計及其驅動電路的介紹

STSPIN820馬達驅動器設計方案

無刷直流馬達及BL系列驅動器使用說明書pdf下載
有刷電機驅動器的功耗計算方法(二)

采用霍爾效應傳感器的三相無刷直流馬達驅動器.

國產單通道直流有刷馬達驅動芯片型號推薦

評論