雙路差分驅動器和接收器
| Number of receivers | 2 |
| Number of transmitters | 2 |
| Duplex | Full |
| Supply voltage (Nom) (V) | 5 |
| Signaling rate (Max) (Mbps) | 10 |
| IEC 61000-4-2 contact (+/- kV) | None |
| Fault protection (V) | -11 to 14 |
| Common mode range | -7 to 7 |
| Number of nodes | 32 |
| Isolated | No |
| ICC (Max) (mA) | 9 |
| Rating | Catalog |
| Operating temperature range (C) | 0 to 70 |
- Meet or Exceed Standards TIA/EIA-422-B and
ITU Recommendation V.11 - BiCMOS Process Technology
- Low Supply-Current Requirements: 9 mA Max
- Low Pulse Skew
- Receiver Input Impedance . . . 17 k
Typ - Receiver Input Sensitivity . . . ±200 mV
- Receiver Common-Mode Input Voltage Range of .7 V to 7 V
- Operate From Single 5-V Power Supply
- Glitch-Free Power-Up/Power-Down Protection
- Receiver 3-State Outputs Active-Low Enable for
SN65C1167 and SN75C1167 Only - Improved Replacements for the MC34050 and MC34051
The SN65C1167, SN75C1167, SN65C1168, and SN75C1168 dual drivers and receivers are integrated circuits designed for balanced transmission lines. The devices meet TIA/EIA-422-B and ITU recommendation V.11.
The SN65C1167 and SN75C1167 combine dual 3-state differential line drivers and 3-state differential line receivers, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, which can be connected together externally to function as direction control. The SN65C1168 and SN75C1168 drivers have individual active-high enables.
