| Topology | Half-Bridge |
| Duty cycle (Max) (%) | 50 |
| Vin (Max) (V) | 15 |
| UVLO thresholds on/off (V) | Programmable/1.25V |
| Features | Current Limiting, HV Start-up, Multi-topology, Pre-Bias Start-Up, Synchronization Pin |
| Operating temperature range (C) | -40 to 125 |
| Switching frequency (Max) (kHz) | 2000 |
| Rating | Catalog |
| Gate drive (Typ) (A) | 2 |
- 105-V, 2-A Half-Bridge Gate Drivers
- Synchronous Rectifier-Control Outputs With
Programmable Delays - High-Voltage (105-V) Start-up Regulator
- Voltage Mode Control With Line Feedforward and
Volt-Second Limiting - Resistor Programmed, 2-MHz Capable Oscillator
- Patent Pending Oscillator Synchronization
- Programmable Line Undervoltage Lockout
- Line Overvoltage Protection
- Internal Thermal Shutdown Protection
- Adjustable Soft-Start
- Versatile Dual Mode Overcurrent Protection With
Hiccup Delay Timer - Cycle-by-Cycle Overcurrent Protection
- Direct Optocoupler Interface
- 5-V Reference Output
The LM5035 half-bridge controller-gate driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feedforward. The floating high-side gate driver is capable of operating with supply voltages up to 105 V. Both the high-side and low-side gate drivers are capable of 2-A peak. An internal high voltage start-up regulator is included, along with programmable line undervoltage lockout (UVLO) and overvoltage protection (OVP). The oscillator is programmed with a single resistor to frequencies up to 2 MHz. The oscillator can also be synchronized to an external clock. A current sense input and a programmable timer provide cycle-by-cycle current limit and adjustable hiccup mode overload protection.
